| General Information |
| Manufacturer |
Velcro Companies |
| Manufacturer Part Number |
90087 |
| Manufacturer Website Address |
http://www.velcro.com |
| Brand Name |
VELCRO® |
| Product Line |
Sticky Back |
| Product Name |
90087 General Purpose Sticky Back |
| Marketing Information |
Sticky Back Tape adheres to most smooth surfaces. Use on walls, glass, tile, plastic or metal. Tape works in conjunction with other fasteners or adheres to itself. More from the Manufacturer |
| Packaged Quantity |
1 / Roll |
| Product Type |
Hook & Loop Fastener |
| Product Information |
| Tape Width |
0.75" |
| Tape Length |
5 ft |
| Dispenser Included |
Yes |
| Application/Usage |
Mounting |
|
|
Multi Surface |
| Container Type |
Roll |
| Physical Characteristics |
| Product Color |
White |
| Miscellaneous |
| Additional Information |
Clean and dry surface before application. |
|
|
Peel tape from fastener and press firmly into place. |
|
|
Adhesive reaches maximum strength after 24 hours. Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener. Removal Instructions: |
|
|
Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun) |
|
|
Peel off the tape (Hook or Loop) the adhesive will remain on the substrate |
|
|
Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball |
|
|
Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments) |
|
|
Stick the ball on the adhesive which is on your substrate and pull it off |
|
|
Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time |
|
|
If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners Weight Rating: 1 lbs per square inch up to 5 lbs Functional Temperature Range: 0-100° F (-18-38° C) |
| Recycled |
No |
| Assembly Required |
No |
| Country of Origin |
Mexico |
|